Newcastle University

0830–0930

Arrivals & registration

0930–0940

Welcome address: Professor Tony Roskilly

0940–1025

Keynote: Decarbonising Heat for Buildings and Industry — Thinking Innovatively, Evaluating Critically by Professor Emeritus Geoffrey P Hammond, University of Bath, UK

Track 1
Cooling
Chair: Professor Kim Choon Ng

Track 2
Carbon Capture and Storage
Chair: Dr Jia Li

1030–1055

Indirect Evaporative Cooling for Achieving High Energy Efficiency
Speaker: Professor Kim Choon Ng (Saudi Arabia)

The effect of incorporation Mg ions into the crystal lattice of CaO on high temperature CO₂ capture
Speaker: Professor Shengping Wang (China)

1055–1120

Dynamic optimization based integrated operations of the desiccant wheel air conditioning system
Speaker: Dr Rongpeng Zhang (USA)

Retrofitting a natural gas combined cycle with post-combustion CO₂ capture for power matched
Speaker: Dr Abigail Gonzalez-Diaz (Mexico)

1120–1135

Tea/coffee break

1135–1200

Modeling and optimization of a water-to-water falling film evaporator
Speaker: Dr Bin Hu (China)

Utilising industrial carbon emissions in polyethylene furanoate (PEF) production with heat supplemented by solar energy: A case study using life cycle assessment
Speaker: Dr Janie Ling-Chin (UK)

1200–1225

Membrane evaporation in CO₂ chemical absorption process using a polybenzimidazole film
Speaker: Miss Zenghua Song (China)

Performance analysis for post-combustion CO₂ capture from a natural gas combined cycle power plant using activated carbon
Speaker: Dr Long Jiang (UK)

1225–1400

Lunch & poster exhibition

Day 1: Tuesday 14 May 2019 Session 2

1400–1445

Keynote: Efficient Utilization of Low Grade Heat by Integrated Network Approaches by Professor Ruzhu Wang, Shanghai Jiao Tong University, China

Track 1
Waste Heat Utilisation and Recovery
Chair: Professor Christos Markides

Track 2
Materials
Chair: Professor Shengping Wang

1450–1515

Thermodynamic and economic comparison of organic Rankine cycle (ORC) and CO₂-cycle systems in internal combustion engine (ICE) waste-heat recovery applications
Speaker: Dr Jian Song (UK)

Fabrication and characterization of electrospun fatty acid form-stable phase change fibers in the presence of copper nanoparticles
Speaker: Miss Ning Xie (China)

1515–1540

Modeling and system analysis of optimized trigeneration system of electrical-heating-cooling energies from textile wastewater for industrial low-grade heat recovery
Speaker: Mr Mohammad Javad Dehghani (Republic of Korea)

Improving the adsorption performance of composite lithium chloride and activated carbon fiber by adding magnesium sulfate with a new method
Speaker: Mr Mojtaba Ejeian (China)

1540–1555

Tea/coffee break

1555–1620

Performance analysis on hybrid absorption-compression heat pump using normal-temperature compressor for high-temperature applications
Speaker: Dr Peng Gao (China)

Thermal management of mineral trioxide aggregate through configuration of thermodynamic quantities
Speaker: Mr Saravana Karthikeyan (Republic of Korea)

1620–1655

Thermodynamic analysis of a novel ejector enhanced vapour compression cycle driven by electricity and low-grade heat
Speaker: Mr Fahid Riaz (Singapore)

The integration of Optic Variable Wall (OVW) and insulation layer for energy saving in buildings
Speaker: Dr Cheng Wang (China)

Day 2: Wednesday 15 May 2019 Session 1

0830–0940

Arrivals & registration

0940–1025

Keynote: Decarbonisation of of Transport Modes by Professor Tony Roskilly, Sir Joseph Swan Centre for Energy Research, UK

Track 1
Heat Transfer
Chair: Dr Ke Wang

Track 2
Thermal Management/Analysis
Chair: Professor Dorota Chwieduk

1030–1055

Dehumidification assessment for desiccant coated heat exchanger in different climates and buildings
Speaker: Dr Xu Zheng (China)

A simplified thermal network model for battery thermal management system with phase change materials
Speaker: Dr Ziye Ling (China)

1055–1120

Modelling and performance analysis of heat exchangers for supercritical CO₂ power systems
Speaker: Dr Lei Chai (UK)

Energy analysis of micro thermoelectric generator: effect of system structure on thermoelectric efficiency
Speaker: Dr Bing-Ang Mei (China)

1120–1135

Tea/coffee break

1135–1200

Numerical investigation of thermal and hydraulic performance of shell and plate heat exchanger
Speaker: Professor Chi-Chuan Wang (Taiwan)

Data-driven energy monitoring and diagnosis of telecommunication sites
Speaker: Miss Ludovica Malafronte (Italy)

1200–1225

On the relation of churn flow and critical heat flux prediction
Speaker: Dr Ke Wang (China)

Modeling thermal and power energy indicators for renewable energy substitution prospects:  Evidence in MENA Region for sustainable energy management
Speaker: Mr Hermas Abudu (China)

1225–1400

Lunch & poster exhibition

Day 2: Wednesday 15 May 2019 Session 2

1400–1445

Keynote: Convection Heat Transfer and Two-phase Flow of Supercritical Pressure CO₂ in Low Carbon Energy Technology by Professor Peixue Jiang, Tsinghua University, China

Track 1
Heat Transfer
Chair: Professor Zhengguo Zhang

Track 2
Thermal Systems
Chair: Professor Hua Tian

1450–1515

Evaluation on heat transfer enhancement of multi-start spirally corrugated tubes by extended performance evaluation criteria
Speaker: Dr Jin-yuan Qian (China)

An effective deterministic method for optimizing combined cooling, heating, and power systems
Speaker: Dr Ming Pan (China)

1515–1540

An experimental study on the heat transfer performance of a closed loop two-phase thermosyphon under two-phase and supercritical states
Speaker: Mr Ye Bai (China)

Research on a coupled total-flow and single-flash (TF-SF) system for power and freshwater generation from geothermal source
Speaker: Dr Guopeng Yu (UK)

1540–1555

Tea/coffee break

1555–1620

Subcooled flow boiling in a microchannel on ZnO micron-rods surface
Speaker: Professor Wei Li (China)

Development and testing of a supercritical carbon dioxide axial turbine expander
Speaker: Mr Guangdai Huang (China)

1620–1655

A numerical investigation on the effect of branched V-ribs design in a rectangular duct on heat transfer and pressure drop
Speaker: Miss Warissara Tangyotkhajorn (Thailand)

Characteristics analysis of a dual-piston free-piston engine generator during the cold start-up process
Speaker: Miss Yidi Wei (China)

1730–2000

Conference Dinner

Day 3: Thursday 16 May 2019 Session 1

0830–0940

Arrivals & registration

0940–1025

Keynote: Advanced Compressed Air Energy Storage System: from Fundamental Research to Technological Application by Professor Haisheng Chen, Chinese Academy of Sciences, China

Track 1
Energy Storage
Chair: Dr Alessandro Romagnoli

Track 2
Energy Efficiency
Chair: Dr Zhiwei Ma

1030–1055

Compressor-assisted thermochemical seasonal storage integrated with solar photovoltaic-thermal collector for domestic heating demand
Speaker: Dr Huashan Bao (UK)

Analysis of operation and energy efficiency of microscale photovoltaic/thermal - PV/T systems in moderate climates
Speaker: Professor Dorota Chwieduk (Poland)

1055–1120

Novel MOF aluminium fumarate coating for adsorption energy storage
Speaker: Mr Majdi Massoud Idris Saleh  (UK)

In-situ fluidized bed heavy oil hydrocracker: energy-efficient reactor for fuel and petrochemical production
Speaker: Dr Bo Chen (China)

1120–1135

Tea/coffee break

1135–1200

Techno-economic study of liquid air energy storage integrated with waste heat recovery solutions
Speaker: Mr Alessio Tafone (Singapore)

Energy, exergy, and thermo-economy analyses of an integrated thermal management system for electric vehicle
Speaker: Dr Zhen Tian (China)

1200–1225

Experimental studies on a strontium chloride/ammonia thermochemical sorption heat storage system
Speaker: Dr Ting Yan (China)

Numerical and experimental investigations on the energy efficiency of air curtains in refrigerated food transport vehicles
Speaker: Miss Ashika Rai (UK)

1225–1400

Lunch & poster exhibition

Day 3: Thursday 16 May 2019 Session 2

1400–1445

Keynote: Graphene based Supercapacitors for Energy Storage: from Atomic Mechanism to Applications by Professor Zheng Bo, Zhejiang University, China

Track 1
Energy Storage
Chair: Dr Huashan Bao

Track 2
Heat Pumps
Chair: Dr Zhibin Yu

1450–1515

Impact of different packed bed heat storage technologies on the performance of a pumped heat energy storage system
Speaker: Dr Zhiwei Ma (UK)

Performance analysis of a novel solar-assisted GAX-based two-stage absorption-resorption heat pump cycle with multiple internal heat recovery
Speaker: Mr Teng Jia (China)

1515–1540

Preparation and thermal properties of modified expanded graphite/aluminium potassium sulfate dodecahydrate form-stabilized phase change materials
Speaker: Mr Shaofei Wu (China)

Experimental research on a small air-source heat pump with an oil-free scroll compressor
Speaker: Dr Youcai Liang (UK)

1540–1605

Demand-side management study for cascade air-water heat pump coupled with thermal energy storage in the UK domestic sector
Speaker: Mr Khoa Le (UK)

Multi-split heat pump drying system for buffer-layer coating of lithium battery
Speaker: Mr Hong-Xin Liu (China)

1605–1615

Closing address

1615–1630

Tea/coffee